MRC Global has been providing automated valves for more than 20 years, evolving from a simple bolt-up, quarter-turn shop into an advanced, fully integrated quarter-turn, multi-turn and linear automation provider with facilities worldwide. The combination of our global strength and our local, technical service simplifies automation maintenance by enabling MRC Global to become the single point of contact for all aspects of our customers’ automation needs.
MRC Global represents the premier valve automation lines in the industry. We provide our customers with everything from simple on-off packages to throttling applications, high pressure gas systems, over pressure protection and emergency shutdown assemblies. Our qualified, technical staff will customize your valve automation requirements to your unique product specifications and identify the most efficient solution for your needs.
KFM Regelungstechnik: KFM Regelungstechnik GmbH is primarily involved with control and regulation in industrial heating and process engineering in almost all sectors of industry, including shipbuilding. Both electronic controllers and control valves are supplied, so that, if necessary, the entire control system can be obtained from on source. lf desired, this can also include qualified consultation and advice on control technology.
- 2-way and 3-way form
- Material EN-GJS-400, GP240GH, GX5CrNiMo (1.4408), Rg5
- Pneumatic and Electric actuators
- Size range DN15 – DN150
- Face-to-Face: EN558-1
- Max. working pressure: DN50-400 10bar, DN500 6bar
- Working temperature up to +350 °C
- Drilling norm EN1092-2, ANSI, JIS
Red Valve:KFM Regelungstechnik GmbH is primarily involved with control and regulation in industrial heating and process engineering in almost all sectors of industry, including shipbuilding. Both electronic controllers and control valves are supplied, so that, if necessary, the entire control system can be obtained from on source. lf desired, this can also include qualified consultation and advice on control technology.
- Size range DN40 – 600
- Design acc. EN593
- F-to-F: EN 558-1 Series 20
- Max. work pressure: DN50-400 10bar, DN500 6bar
- Working temp: -60 °C to +190 °C
- Test: EN 12266-1 Rate A
- Drilling norm EN1092
Actuators & Accessories
GT Attuatori: G.T. Attuatori manufactures pneumatic actuators and related accessories. The company has been part of Rotork group since 2013. Besides pneumatic rack and pinion actuators, G.T. Attuatori also manufactures a range of rotary switch boxes with mechanical or proximity sensors as well as NAMUR solenoid valves, and a complete accessory range including brackets, couplings and adapters.
- Double- and single acting actuators
- Torque from 3 to 8000Nm
- ATEX, GOST, SIL3 und RTN
- ISO- and NAMUR interface
- Angle rotation 90°, 120°, 180° and 240°
- Special actuators
- Solenoid valves and throttle plates
- Rotary switch boxes
- Mounting accessories
Auma: In process technology plants, liquids, gases, vapours, and granulate need to pass through pipelines. Industrial valves are used to inhibit or release medium flow as well as to control the resulting flow rate by opening or closing the valves. AUMA actuators are remotely controlled from the control room to operate valves.
BESI Marine Systems GmbH: BESI Marine Systems GmbH - your Partner for flow management systems and maritime technology. Hydraulic and electrohydraulic actuators for quarter-turn and linear valves.
- Remote Control Systems
- Tank Level Gauging and Draft Measurement
- Anti-Heeling System
- Hydraulic Spring Return Actuators
- Hydraulic Double-Acting Actuators
- Hydraulic Linear Actuators
- Electro-Hydraulic Power Packs
- Pneumatic Quarter Turn Actuators
- Linear Pneumatic Actuators
- Electric Quarter Turn Actuators
- Electric Linear Actuators
Product, suppliers, manufacturers and services vary by region. For more information, contact an MRC Global location in your region.