MRCGO™ Change country

MRC Global Norway AS, Instrumentation Division is Norway's leading supplier and stock holder of Instrument Tube Fittings, Tubing, Valves, Manifolds, Actuators and related accessories. Instrumentation Division represents high-quality products and best-in-class manufacturers. Because of our focus on high quality at all levels, especially within our product segment, Instrumentation Division holds many long term frame agreement contracts with the main key players operating in the Norwegian offshore sector.

Contact us:

instrumentation.no@mrcglobal.com

Analyzers

We can offer a wide range of liquid analyzers for pH, ORP, conductivity, salinity and O2. A good solution is based on knowledge on the product as well as knowledge on the application where the products are going to be used.

In the end it is the total cost for a solution that is important. The price for the product is small comparted to the total cost for the product during the complete life cycle. This cost is related to performance, installation, commissioning, maintenance, service etc.

Choosing the correct product for the specific application might reduce the total cost of ownership significantly.

Challenge us.

Liquid Analyzers:
  • pH/ORP
  • Conductivity
  • Dissolved Oxygen Meters
Gas Analyzers:
  • Okygen Analyzers
  • Infra-Red Analyzers
  • Process Gas Chromatographs
  • Gas Denisty Meters
  • TruePeak tunable diode laser (TDL)



Fittings

Butech

A leading manufacturer of high and ultra high pressure valves, tubing, fittings and accessories.

Pressure rating: From vacuum to 150.000 Psig (10.000 Barg)

Dimension: From 1/8" to 1"

Material: 316SS, Duplex / SuperDuplex, 6MO, Inconel, Titanium and others

MRC Global Fittings

MRC Global Fittings MRC Global Fittings MRC Global Fittings MRC Global Fittings
Hoke

is the logical choice for fluid control solutions, offering best in class reliability and availability. Hoke has been recognized as a quality manufacturer within the product segments that they represent.

Hoke Gyrolok:

  • Compression Tube Fittings in metric and Fractional Sizes
  • Precision Pipe Fittings in sizes 1/16 through 2"/38mm
  • Safe reliable performance

Hoke Valves, Manifolds, Actuators, Cylinders and Accessories:

  • Needle Valves & Ball Valves
  • Metering Valves & Plug Valves
  • Check Valves & Relief Valves
  • Bleed Valves & Toggle Valves
  • Rising Stem Plug Valves
  • Packless Valves
  • Filters
  • Manifolds

View Gyrolok Video

View the Hoke Product Catalog

MRC Global Fittings

MRC Global Fittings
Hoke Catalogs:
Silver Seal Tape

The Silver Seal Tape is a unique world class thread sealing tape which prevents threads from galling or sizing during assembly or disassembly of threaded fittings.

The Silver Seal Tape also work as a sealing compound while in service.

When using the Silver Seal Tape it allows for pressurizing the system whenever needed (no need for hardening process).

MRC Global Fittings



Flame Arrestors

Protego

Protego builds and distributes safety devices and tank equipment.

  • Vent Caps - Deflagration-proof
  • Vent-Caps - Longburning-proof
  • In-Line Flame Arresters - Deflagration-proof
  • In-Line Flame Arresters - Detonation-proof
  • Combined Pressure & Vacuum Relief Valves
  • Hydraulic Flame Arresters
  • Foot Valves
  • Safety equipment for underground storage tanks
MRC Global Fittings



Level

MRC Global Norway AS has a wide selection of level transmitters, indicators and switches for liquid and solid applications.

We collaborate with some of the world leading suppliers in the field. This in combination with a wide range of measuring technologies, we can supply robust and accurate measurement solutions for your application.

MRC Global Level
Magnetrol

Magnetrol was the first supplier of guided wave radar for industrial level measurement back in 1998 and are still a leading supplier of this technology. Magnetrol have solutions for heavy duty applications in the oil and gas, chemical and power industry as well as general industrial applications.

UWT GmbH

UWT GmbH is a supplier of level transmitters and switches for solid and liquid applications. They are specialized on reliable, maintenance free level switches for solids applications.

Gems Sensors & Controls

Gems offer a broad range of contact, non-contact, and non-intrusive liquid level sensors and switches. These are available in multiple technology types, including magnetic reed switch based floats, solid-state electro-optical, conductivity, capacitive, ultrasonic and piezo-resonant.

Sika

Sika supplies measurement, control and calibration technology for flow, level, temperature, pressure and force. For level detection they supply ultrasonic transmitters and float based transmitters and switches.

BD Sensors

BD-sensors manufactures pressure transmitters and differential pressure transmitters and represents pressure measurements at the highest level. Short delivery times and high-quality products at the right price are keywords for BD-Sensors.

Yokogawa

Supplier of high quality and high accuracy pressure transmitters with a premium long term stability. The unique measuring principle DP-HARP has benefits compared to the traditional ways of measuring pressure.

Visit Supplier Websites Below for More Level Information:

Level Switch - Liquids:

Level Measurement - Solids:


Level Switch - Solids:


Density - Liquids:

  • Displacer - Magnetrol
  • Visualization and Data Logging

    We supply solutions for data logging, inventory management and HMI systems fit for your application. Contact us for references and more information.

    MRC Global Level



    Regulators

    Circle Seal Controls Inc

    Provides a wide range of valve & control products, souch as: Check valves, Automatic valves, Pressure regulators, Relief valves, Shut-off valves and Solenoid valves.

    MRC Global RegulatorsMRC Global RegulatorsMRC Global Regulators
    Farichild

    Continually engaged in developing products to ensure the best fit for your applications.

    • Regulators
    • Accessories
    • Transducers
    • Relays
    MRC Global Regulators
    Tescom

    Delivers a wide range of standard and custom-engineered precision pressure control solutions for a diverse world market.

    • Pressure reducing regulators
    • Relief valves/Back pressure regulators
    • Manifolds/Changeover regulators
    • Electro-pneumatic regulators
    MRC Global Regulators



    Temperature

    MRC Global Norway AS, Instrumentation division has years of experience in the field of temperature measurements. Located in Skotselv we have for many years developed products and expertise for our in-house manufacturing of temperature sensors, both standard and custom sensors.

    We have a broad range of temperature measurement products and in-house manufacturing facility for temperature sensors and thermowells for measuring in the range of -200°C to +2000°C.

    Our skilled workers with up to 30 years of experience and flexible production planning ensures fast lead times even on custom sensors.

    MRC Global Regulators

    Fiber optic transformer monitoring

    Reliable, accurate Fiber Optic monitors quickly detect and respond to hot spot conditions, triggering alarms and relays to protect your most valuable assets. It is immune to High Voltage, RFI, EMI and transformer oil or SF6 gas, dynamic measurement system.

    LumaSense Technologies

    LumaSense Fiber Optical Temperature product lines have set the standard in the energy, research and medical industries. Based on Fluoroptic and Gallium Arsenide material technologies, each individual product can be configured for a specific application starting from basic electronic instruments or OEM modules to complete turn-key systems.

    MRC Global Temperature
    Infrared Thermometers (Pyrometers)

    Pyrometers are temperature measurement instruments that operate on the principle of infrared radiation, i.e. they detect infrared radiation of objects to determine the temperature. In many industry sectors, the use of non-contact temperature measurement instruments is an important technology. For example, it is used for controlling complete factory processes or measuring even the smallest components to ensure a consistent quality level.

    LumaSense Technologies

    With a huge pyrometer product portfolio developed from years of research and customer contact, LumaSense Technologies provides solutions for nearly every application request.

    RTD

    MRC Global Norway AS supplies RTD from our in-house production. We have a wide range of RTD's for measurements in the range of -200°C to +600°C.

    MRC Global RTD pdf

    MRC Global Regulators
    Thermocouple

    MRC Global Norway AS supplies thermocouples from our in-house production. We have a wide range of TC's for measurements in the range of -200°C to +2000°C.

    MRC Global Thermocouples pdf

    MRC Global Regulators
    Thermal Imagers

    IR thermocameras for industrial use for control of bearings, electronics, generators and more.

    Possibilities for automatic temperature control. Measuring 24/7 with possibilities for alarms, when changes in temperature areas. Remote monitoring of several critical spots to control center.

    LumaSense Inc.

    LumaSense thermal imaging cameras and systems accurately measure temperature and operate by using reliable infrared technology. These high-tech Instruments can precisely determine the object temperature and the temperature distribution even on small and fast moving objects.

    Thermal imaging cameras perform an essential control function in major manufacturing industries. By monitoring the temperature, users can control entire factory production processes as well as ensure highest quality standards.

    MRC Global Regulators
    Thermowell

    MRC Global Norway AS supplies thermowell from our in-house production. We supply standard and custom termowell's for a broad range of applications.

    MRC Global Thermowells pdf

    MRC Global Regulators
    Thermometers

    MRC Global Norway AS can supply a wide range of thermometers to almost any application and have years of experience. The thermometers is divided into 3 main groups:

    • Industrial thermometer
    • Gas filled thermometer
    • Bimetallic thermometer - ARMATURENBAU GmbH katalog (.pdf 202kB)
    • Bimetallic thermometer - Rototherm Group katalog (.pdf 732 kB)
    MRC Global Regulators
    PDF:
    Transmitters

    MRC Global Norway AS can supply a wide range of transmitters that can be used for many different unique applications.

    PR-electronics

    Since 1974 PR-electronics has produced and developed signal conditioning units for the process and factory automation industry. PR-electronics are known for outstanding quality – high, long-term signal accuracy and reliability in all environments. All devices are individually validated to exceed the most demanding failure rate assessments and are backed by comprehensive technical documentation and a 5-year warranty.

    Yokogawa

    Yokogawa supplies Field-mounted temperature transmitters that are designed with a dual compartment housing, local Setting Function and many other features. Supplied with communication protocol such as HART or Fieldbus.

    MRC Global Regulators
    Heaters

    MRC Global Norway AS can supply a wide range of heaters that can be customized for many different unique applications. We can supply heaters for a broad range of industries and has years of experience.

    Watlow

    Watlow offers a wide range of high-performance heater products. Watlow supplyes products that can be ordered as standard units or customized units for almost any application. Watlow supplies products for various industries.

    GC-heat

    GC-heat is the specialist for electrical heating elements. Since over 65 years GC-heat has been developing and producing heating elements for various industrial applications. GC-heat offers a wide range of customer specified heating elements.




    Pressure

    MRC Global has a long tradition of manufacturing pressure gauges in Norway. Since 1903 when the company AS Clausen, Kaldager & co was founded, we have manufactured pressure gauges for offshore, marine and on-shore industry.

    The company has changed brand several times in the past, but we have with proud kept the company logo from the early days on all of our pressure gauges. All our pressure gauges has still got the C&K-logo on the dial. We are the sole manufacturer in Norway of pressure gauges, and our high qualified staff are able to offer you tailor-made solutions and products to a compatible price in a short time. Naturally, we stock a wide range of standard products as well. Additionally to our own production we represent several of the world leading manufacturer and suppliers of pressure transmitters, pressure switches, differential pressure transmitters and differential pressure gauges.

    With more than 100 years of experience we are your first choice for all pressure products.

    Special executions of our pressure gauges are available on request.

    We also are able to supply the instrument with chemical seal for use with different type media or viscous media.

    Pressure Handbook from Yokogawa – A Basic Guide to Understanding Pressure Download (.pdf 6,48 MB)

    MRC Global Regulators

     

    Indicating pressure transmitter type IT

    Indicating pressure transmitter type IT is a combination of a manometer and a pressure transmitter. It gives out a 4-20 mA signal additional to the mechanical reading. Benefits of this instrument is only one mechanical connection point.

    Measuring principles are independently, so that if one fails, the other system is still intact. Measuring ranges from 0-0.6 bar to 0-40 bar.

    MRC Global Pressure Gauges
    Industrial pressure gauge type IM

    Industrial pressure gauge type IM is a good choice for general use. The instrument is very robust and available in 6 different sizes (Ø40 mm, Ø63 mm, ø80 mm, Ø100 mm, ø160 mm and ø 250 mm diameter).

    The most commonly used sizes are Ø100 mm and Ø63 mm. Most industrial pressure gauges are available with different solutions. Pressure ranges go from 0-25 mbar up to and including 0-4000 bar.

    Also available for vacuum area.

    MRC Global Pressure Gauges
    Safety pattern pressure gauge type SM

    Safety pattern pressure gauge type SM is a manometer especially designed for offshore use with high safety demands for instrumentation. The main difference between an industrial pressure gauge and a safety pattern pressure gauge is an entire wall between the sensor element and the front of the pressure gauge, and that the rear back wall of the instrument is a separate part that will loosen if a powerful overpressure should occur in the process. Along with a laminated front glass operators are safeguarded.

    Safety pattern pressure gauges are available in Ø63 mm and Ø100 mm diameter and pressure ranges from 0-25 mbar to 0-4000 bar.

    Also available for vacuum area.

    MRC Global Pressure Gauges
    Subsea pressure gauge type SS

    Subsea pressure gauge type SS is specially designed for permanent use under water. It has a reinforced fiberglass polyester casing, and comes with a anti-reflex front glass which makes it possible to lighten it up on high depths without getting reflex from the glass.

    The instrument is pressure compensated for use on high depths. Pressure ranges from 0-0,6 bar up to 0-4000 bar.

    MRC Global Pressure Gauges
    SOR Inc

    SOR Controls Group Ltd. (SCG) is a global leader in the design and manufacture of measurement and control devices under the brands of SOR Inc. SOR Controls Group serves all sectors of the process industry with particular strengths in the oil & gas, petrochemical, chemical and power segments. SCG also maintains an engineering and design team capable of providing engineered-to-order systems and products when required.

    The exact instrument you need delivered when you need it. It’s what SOR® has built its reputation on since 1946. SOR has enjoyed the distinction of meeting the challenges of the measurement and control industry for many years. SOR provide the most reliable electronic and electromechanical pressure, level, temperature and flow instruments available in weatherproof, hermetically sealed or explosion proof models.

    MRC Global Pressure Gauges

    MRC Global Pressure Gauges
    Pressure transmitters

    BD-Sensors manufactures pressure transmitters and differential pressure transmitters and represents pressure measurements at the highest level.

    Measurement ranges available from 0-0,1 mbar up to 0-6000 bar.

    For more than 20 years, BD-Sensors have manufactured OEM-products as well as high-end products and special solutions for customers, onshore and offshore/shipping.

    Short delivery times and high-quality products at the right price are keywords for BD-Sensors.






    Tubing

    BluTech

    BluTech is a leading manufacturer of high and ultra high pressure valves, tubing, fittings and accessories.

    Pressure rating:
    From vacuum to 150.000 Psig (10.000 Barg)
    Dimension:
    From 1/8" to 1"
    Material:
    316SS, Duplex / SuperDuplex, 6MO, Inconel, Titanium and others

    MRC Global Tubing

    MRC Global Tubing MRC Global Tubing MRC Global Tubing MRC Global Tubing
    Dekoron Unitherm

    Dekoron Unitherm heat control products are an efficient, low cost method for installing heat traced instrument lines.

    Dekoron Unitherm heat control products are engineered to meet the design and operating specifications of the refining, petrochemical, chemical, power, and associated industries.

    Product Range

    • Heat-traced Tube
    • Pre-Insulated tubing
    • Multi-tube (tube bundle)
    • Pre-Insulated Steam Traced tube
    • Electric Heated Hoses
    • Accessories
    MRC Global Tubing MRC Global Tubing MRC Global Tubing

    MRC Global Tubing MRC Global Tubing MRC Global Tubing
    Instrument Tubing

    Instrumentation Division is Norway's leading stockist of instrument Tubing.

    Largest inventory in Norway of high alloy instrument tubes as 316, 6MO, Duplex 2205, Super Duplex 2507, Titanium Gr.2 and Hastelloy C-276 according to Norsok M630 (latest revision) and from M650 and TR2000 approved mill.

    We also stock medium and high pressure tubing in 316, 6MO and Super Duplex 2507 material. Dimension from 3MM OD to 38MM OD / 1/8“OD to 2“OD). Main supplier is Sandvik

    MRC Global Tubing
    KME Osnaline

    With almost 50 years of experience, KME offers a variety of specialised tube bundles known as OSNALINE®. Low cost, time saving for installation, less use of tube fittings, saving space, and a reduced number of potential leaking points are just some of the benefits you'll experience when using OSNALINE®.

    OSNALINE® Tube Bundles are primarily used in:

    • hydraulic and pneumatic systems
    • measuring and analysing systems
    • effective and differential pressure systems.

    Tube Sizes:

    • 6mm to 12 mm O.D.
    • and 1/4" to 1/2" O.D.
    • Up to 24 number of tubes per bundle

    Length:

    • up to 500 meter per coil
    MRC Global Tubing
    MRC Global Tubing
    Tube Clamps

    Stauff ACT: Anti Corrosion Clamps

    Material and design in compliance with section 7.3 (Tubing Installation) of the Norwegian offshore standard Norsok Z-010 (Revision 3, published in October 2000 ), API RP 552 and NACE SP 0108-2008 (section 13).

    Clamp body made of flame-retardant PPV0 plastic material; tested and V0 classified according to UL 94

    Integrated ACE anti-corrosion elastomer strips avoid the accumulation of seawater between clamp body and tubing

    Drainage channels aid the dispersal of seawater

    ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling.

    MRC Global Tubing
    PDF:



    Valves

    All our suppliers are world class suppliers within their fields. We have worked hard over several decades to build up a supplier portfolio that is the best in their class, and we have succeeded. Our product range is unique and through our close cooperation with our partners, we have contributed to the development of new solutions for the industry.

    BuTech

    BuTech is a leading manufacturer of high and ultra high pressure valves, tubing, fittings and accessories.

    Pressure rating:
    From vacuum to 150.000 Psig (10.000 Barg)

    Dimension:
    From 1/8" to 1"

    Material:
    316SS, Duplex / SuperDuplex, 6MO, Inconel, Titanium and others

    MRC Global Valves

    MRC Global Valves MRC Global Valves MRC Global Valves MRC Global Valves
    Hoke

    is the logical choice for fluid control solutions, offering best in class reliability and availability. Hoke has been recognized as a quality manufacturer within the product segments that they represent.

    Hoke Gyrolok:

    • Compression Tube Fittings in metric and Fractional Sizes
    • Precision Pipe Fittings in sizes 1/16 through 2"/38mm
    • Safe reliable performance

    Hoke Valves, Manifolds, Actuators, Cylinders and Accessories:

    • Needle Valves & Ball Valves
    • Metering Valves & Plug Valves
    • Check Valves & Relief Valves
    • Bleed Valves & Toggle Valves
    • Rising Stem Plug Valves
    • Packless Valves
    • Filters
    • Manifolds

    View Gyrolok Video

    View the Hoke Product Catalog

    MRC Global Fittings

    MRC Global Fittings
    Hoke Catalogs:
    Circle Seal Controls Inc

    Circle Seal Controls, Inc provides a wide range of valve & control products, souch as: Check valves, Automatic valves, Pressure regulators, Relief valves, Shut-off valves and Solenoid valves.

    MRC Global ValvesMRC Global ValvesMRC Global Valves
    Habonim

    Habonim is a leading manufacturer of ball valves and pneumatic actuators. With over 50 years of experience, the company enjoys a worldwide reputation for its high quality, innovation and engineering expertise, and offers the industries best customized services. Habonim supplies a wide range of 3-piece and flanged ball valves, as well as tailor-made solutions and the only 4-piston pneumatic actuator in the world, generating significant cost and space savings for its customers.

    All Habonim products meets international standards and are engineered to work safely and efficiently in a variety of applications.

    With a worldwide presence, Habonim is considered a key provider by many of the major companies in the following industries: Chemical, Petrochemical, Oil & Gas, Offshore Drilling, Marine, Pulp and Paper, Nuclear, Semiconductor, Pharmaceutical, Biotech, Food and Beverage and others.

    Product range:

    • Ball Valves
    • 4 Piston Pneumatic Actuators
    • Double Block and Bleed Valves
    • Control Valves
    • Cryogenic Valves
    • Metal Seated Valves
    • Multi Valve Solution
    • Customized Solutions

    MRC Global Valves

    Catalogs:

    Pister

    PISTER Kugelhähne GmbH is one of the leading manufacturers of high pressure shut-off valves, control valves, manifold valves, quick couplers and customer-specific solutions for a wide variety of industrial applications.

    Product range:

    • Ball Valves, 2-Way, 3-Way and Multiway
    • Hydraulic Manifold, 6-and 8-way
    • Rov Operated Ball Valves
    MRC Global Valves
    Protego

    Protego builds and distributes safety devices and tank equipment.

    Product range:

    • Vent Caps -Deflagration-proof
    • Vent-Caps -Longburning-proof
    • n-Line Flame Arresters -Deflagration-proof
    • In-Line Flame Arresters -Detonation-proof
    • Combined Pressure & Vacuum Relief Valves
    • Hydraulic Flame Arresters
    • Foot Valves
    • Safety equipment for underground storage tanks
    MRC Global Valves
    Sigma Valves

    Sigma Valves is a specialty valve manufacturer in business since 1968. Innovative-engineered solutions are the inspiration for the product line. Sigma Valves' mission is to design and manufacture the highest quality stainless steel control valves appropriate for harsh environments in the oilfield, aerospace, and pharmaceutical industries.

    Sigma Valves is dedicated to provide its customers with innovative products, timely delivery, and unmatched reliability.

    Product range:

    • Hydraulic Quick Exhaust Valves
    • Pilot Sensing Valves
    • Hydraulic Control Valves
    MRC Global Valves
    Subsea

    MRC Global Norway AS is a provider of BuTech Subsea Valves. BuTech Subsea offshore.

    Dimension:
    1/ 4" to 1/2"

    Pressure Rating:
    Up to 15000 PSI (1050 Barg)

    Water Dept:
    Down to 4000 meters

    Materials:
    316SS, Duplex, SuperDuplex, Inconel 625 and others.

    ROV Bucket (optional)
    Certified laboratory with assembling and testing facilities in-house
    Qualified in accordance with API 6A / ISO 10254

    Documentation:
    Complete standard SubSea documentation Package such as:
    Full NDE / Material verification / certificates
    Full tracebility / Serialization
    FAT / Performance Test in acc to ISO 10254

    MRC Global Valves

    MRC Global Valves MRC Global Valves MRC Global Valves MRC Global Valves
    Versa Valves

    Every Versa Product begins with exellence.

    Versa pioneered modular directional control valves, in which a variety of standard bodies, spools, and actuators can be assembled in thousands of ways to meet virtually any valve application.

    This concept – coupled with Versa's patented «anti-extrusion» arrangement of «O» ring seals, leak-proof, rugged forged and solid-rod construction, small residual volumes, 100% testing before shipment, quick delivery, and worldwide service – has made Versa a leading name in air valves

    Control Valves

    • Manually, mechanically, and/or solenoid operated
    • Remote pressure pilot operation
    • Wide range of sizes and configurations
    • Accessories as Bleed Valves, Dust Excluders, Quick Exhaust Valves etc.
    • Modular Air Package (VMAP & CMAP)
    MRC Global Valves

    MRC Global Valves



    Enclosures & Heaters

    Intertec

    Intertec is a supplier of unique systems designed to provide reliable protection of sensitive field-mounted instruments.

    Today, more than half a million Intertec protection systems ensure safe operation of instruments, analyzers, mobile phone and radar equipment, signalling plants, transmitters and many other installations worldwide. Due to extensive expertise in engineering, constant innovation and product improvement Intertec has become the world's leading manufacturer in this field.

    Product range:

    • Instrument Enclosure
    • Cabinets
    • Ex Heaters
    • Accessories
    MRC Global Enclosures and Heaters


    Product, suppliers, manufacturers and services vary by region. For more information, contact an MRC Global location in your region.